Close

July 17, 2018

Hatch LSP3 Surge Protector Samples Available NOW!

FOR IMMEDIATE RELEASE  Hatch Lighting’s LSP3 series of surge suppressors are UL-recognized Type 4CA surge suppressor devices. These surge suppressors come in two surge pulse current ratings. The LSP3-10 devices are capable of a maximum single discharge current pulse of 10,000 amps. The LSP3-20 devices are capable of a maximum single discharge current pulse of 20,000 amps. Each device can be ordered with an end-of-life indicator LED, which is illuminated when protection is still provided. The LSP3-10 family is available in at mains voltage rating of 120-277VAC. The LSP3- 20 devices are available in both a 120-277VAC range and an industrial range of 347-480VAC. These surge suppressors are suitable for field or factory wiring and offer higher levels of protection against IEEE 62-41 combination wave surge pulses than most in-circuit driver suppression devices. Protection is provided for line-neutral, line-ground and neutral-ground referenced surge pulses. Single mounting hole provides for easy installation in the factory or in the field.

The following models are now available for order:

  • LSP3-10-UNV – 10kA single pulse, 5kA nominal 15 pulse, 120-277VAC, no EOL indicator LED
  • LSP3-10L-UNV- 10kA single pulse, 5kA nominal 15 pulse, 120-277VAC, includes EOL indicator LED
  • LSP3-20-UNV – 20kA single pulse, 10kA nominal 15 pulse, 120-277VAC, no EOL indicator LED
  • LSP3-20L-UNV – 20kA single pulse, 10kA nominal 15 pulse, 120-277VAC, includes EOL indicator LED
  • LSP3-20-480 – 20kA single pulse, 10kA nominal 15 pulse, 347-480VAC, no EOL indicator LED
  • LSP3-20L-480 – 20kA single pulse, 10kA nominal 15 pulse, 347-480VAC, includes EOL indicator LED

July 17, 2018